Powerfix Profi KH3301, Руководство по эксплуатации

Страница: 39 / 52

- 37 -
If you direct the laser beam in horizontal adjustment into a corner,
the laser beams on both walls and in the corner are at exactly the same
distance from the floor (see Fig. 2: 3 Point measurement).
Fig. 1: Horizontal and vertical
measurement
Fig. 2: 3 Point measurement
Using the laser without a tripod
• Place the tape measure on a surface that is as level as possible.
• Press the On/Off switch
a
to activate the laser.
• Adjust the tape measure with the aid of the foot screws
y
/
r
such that
the bubble in the spirit level
t
lies centrally between the markings.
If you screw out the foot screw
y
a little further, you can project the laser
line somewhat higher.
• Direct the laser line onto the desired wall.
• Push the crossline lens
i
down in front of the laser exit opening when you
want to project a vertical and horizontal line.
1m
1m
1m
IB_KH3301_BN37923_LB5.qxd 15.10.2009 8:22 Uhr Seite 37