5
GB
DRILL STAND
Introduction
We congratulate you on the purchase of your
new product. You have chosen a high quality
product. Familiarise yourself with the product
before using it for the first time. In addition,
please carefully refer to the operating instructions
and the safety advice below. Only use the
product as instructed and only for the indicated
field of application. Keep these instructions in a
safe place. If you pass the product on to anyone
else, please ensure that you also pass on all the
documentation with it.
Intended use
The product is designed for commercial drills and
is suitable for placing exactly defined holes at
right-angles into wood, metal and ceramic tiles.
It is possible to mount the work-piece securely
during drilling. Consult the manufacturer‘s
operating manual before using the drill. The
product is not intended for commercial use.
Parts description
Drill stand:
1
Bolt
2
Lever arm
3
Drill holding fixture
4
Guide slot (4 x)
5
Drill hole (4 x)
6
Base plate
7
Pillar
8
Block
9
Slider
10
Locking screw
11
Drill depth gauge with indicator
12
Screw
Vise:
13
Vise
14
Long slot
15
Locking device
16
Quick-release button
17
Clamping jaw
Contents
1 Drill stand
1 Hexagon key
1 Vise
1 Operating instructions
Technical data
Drill holding fixture for
clamping collar diameter: 43 mm
Drilling depth:
to 60 mm steplessly
adjustable
Dimensions:
155 x 505 x
225 mm
(W x H x D)
Clamping jaw width:
65 mm
Clamp width:
65 mm
Safety advice
YOU SHOULD STORE ALL SAFETY
INFORMATION AND INSTRUCTIONS IN A
SAFE PLACE IN CASE YOU NEED TO REFER
TO THEM AGAIN IN THE FUTURE!
m
CAUTION! RISK OF INJURY!
When
working with hand-operated electrical tool,
slipping or loosening of the mounted work-
piece can cause severe injuries. Therefore,
never work on a mounted work-piece using a
hand-operated electrical tool.
m
CAUTION! RISK OF SHEARING OR
CRUSHING INJURY!
There is the risk of
shearing or crushing injuries while working
with the drill stand.
