V4.0
Beam Cutter
8885048
7
For technical questions call 1-800-665-8685
9. Repeat steps 2 to 8 until all cuts are complete.
10. Stop the chainsaw and wait for the chain to stop moving. Loosen the U-
clamp bolts and remove the chainsaw. Store the beam cutter and
chainsaw.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier
to control and will have fewer problems.
2. Keep all cutting tools sharp and clean.
3. Keep handles dry, clean, and free from oil and grease.
4. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CLEANING
Clean the beam cutter after each use, removing any sawdust build-up that
may collect on the tool.
STORAGE
The beam cutter should not be stored outside; it could get damaged from
rust. Keep the beam cutter in a covered, dry place.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
