Switched Mode Power Supply
Operating manual
PAP3200
Perämiehenkatu 6, FIN 24100 Salo, Tel. +358 2 777 290, Fax +358 2 777 2918, [email protected], www.powerfinn.fi
1
Features:
Wide output range 0…320Vdc
Analog control by an external
0…5Vdc
Power failure alarm output
Master-slave connection
Powerfinn PAP series is a high power, lightweight, advanced power supply using modern switching technology.
All units can be used as a power supply or constant voltage battery charger. The output voltage and output
current can be adjusted from 0 to maximum value by an external 0-5V analog control, with internal adjustment
trimmers or from serial bus.
Specifications
Input voltage
70…264Vac 1–phase ( 70…230Vac, reduced power )
70…369Vdc
Efficiency
89% at full load, >90% at 50% load ( 230Vac input )
Input current
16A ( max)
Frequency
47–63Hz
Power factor
>0,98
Inrush current
soft start
Output ripple
<1% from output voltage, rms
Mechanics
Wall mounting, see dimensions p. 3
Connectors
Input
Input power cord
Output
Models 12V, 24V, 36V, 48V
copper busbar terminals
Models 72V, 110V, 160V, 220V 10mm
2
3m output cables
Enclosure
Aluminum case, IP20
Weight
7,1 kg without cables
Output Grounding
Floating
Ambient temperature range
-20°C…+40°C at full load, abs. max. +55°C
Overtemperature protection
Processor controlled on/off
Overcurrent protection
Electrical current limit
Reverse polarity protection
With fuse ( 12VDC version doesn’t have fuse )
Standards
Safety
Class 1
EN60335-2-29:2004
EN60335-1:2002 +A11:2004 +A1:2004 +A12:2006 +A2:2006
EN50366:2003 +A1:2006
Conformity can be limited depending end application,
output control method or unit mechanical structure
EMC
Limits EN55022 Class A or B,
Application must discuss in detail
