2
Table of
contents
POWERFINN PAC 1600 ........................... 2
General ...................................................... 2
Installation.................................................. 3
Operations ................................................. 4
Safety Instructions ..................................... 5
Troubleshooting and repair........................ 6
Guarantee .................................................. 6
Appendix A ................................................ 6
Appendix B ................................................ 7
Appendix C ................................................ 7
Important
Read this manual before installing, or operating the battery charger.
PAC 1600
Powerfinn PAC 1600 battery chargers use modern switching
technology. The intelligent micro controller extends the life of the
battery by supervising the charging process. The charger is compact,
lightweight and meets the EU safety and EMC requirements.
General
PAC chargers are available for a variety of battery types. The charger
type is indicated on the label attached to the side of the charger.
Be sure to always use the correct type of charger. The charger type
should correspond to the battery construction (sealed, vented, etc.)
Attempting to charge a battery with the wrong type of charger may
result in considerable damage.
Check the battery to ascertain that the “five hour capacity” (in ampere-
hours, Ah5) is between 5 and 14 times greater than the nominal current
(in amperes) of the charger. E.g. a 10A charger is suitable for charging
batteries with a 5 hours capacity of 50A-140A.
All manuals and user guides at all-guides.com
