PowerDsine PowerView, Руководство пользователя

Страница: 13 / 54

Web Manager User Guide 3. Installation
Version 2.1 11 March 2003
3 Installation
3.1 System Requirements
The following hardware/software items are required in order to configure and
operate the Power over LAN (PoL) Midspan.
! ! ! ! Computer environment
# Operating system: WIN 98 or WIN 2000 or WIN XP
#
Serial ports: COM1 or COM2 are active and available
# Access to a local network and Internet
# Null-modem cable
# Ethernet cable.
! ! ! ! Administrative requirements
# IP address for the PoL Midspan (to be obtained from the network
manager, unless the services of a DHCP server are used)
# Internet browser installed (recommended Explorer 5.0 and higher)
# Verify your computer IP address, using one of the following:
For WIN 98
1. Go to
DOS prompt
(
Start
>
Programs
>
MS-DOS Prompt
).
2. Type the command:
ipconfig
,
then click
Enter
.
3. Write down your IP address, your default gateway and the subnet
mask, for future reference.
For WIN 2000 and WIN XP
1. Go to
Run
(
Start
>
Run
).
2. Type
cmd
.
A DOS type window will open; then click
OK
.
3. Type the command
ipconfig
,
then click
Enter
.
4. Write down your IP address, your default gateway and the subnet
mask, for future reference.
3.2 Software Installation
3.2.1 CD Contents
PowerDsine PowerView is delivered with a CD that includes a number of
programs:
! ! ! !
SnmpLocalClient
folder – files used to surf the PoL unit locally.
! ! ! !
javaws-1_0_1_XX-win-int-rt.exe
– this is the Java Web Start software.
! ! ! !
PowerDsine pack n.n
– the folder includes a pack of software files for
SNMP capabilities.