2
Powercraft
SCROLL SAW MACHINE
TECHNICAL DATA
CONTENT OF THE PACKING
1 Scroll saw
1 Protective cover
1 Screw for installing the protective cover
2 Saw blades
2 Adapters for universal saw blades
2 Allen key
1 Dust blow pipe
3 Rubber feet
3 Screws with nuts and rings for installing the rubber
feet
1 Cross guide
1 Operating manual
1 Safety manual
1 G uarantee card
Check the machine, loose parts and accessories for
transport damage.
DESIGNATIONS
Fig.A
1. On/off switch
2. Locking arm
3. Cross guide
4. Dust blow pipe
5. Protective cover
6. Tensioner head
SAFETY INSTRUCTIONS
The following symbols are used in these instructions for
use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of the
instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
ELECTRICAL SAFETY
Check that the mains voltage corresponds to the
voltage listed on the rating plate.
Mains connection
Only use earthed sockets with earthing wire connected
per the regulations.
Replacing the mains connection cable
The mains connection cable may only be replaced by a
special cable in a specialised workshop.
Replacing cables or plugs
Dispose of old cables or plugs immediately after repla-
cing them. It is dangerous to connect the plug of a loose
cable to a wall socket.
Using extension cables
Only use an approved extension cable, corresponding to
the machine power use. The wires must have a minimum
cross section of 1.5 mm2. If the cable is on a reel, it must
be fully paid out.
GENERAL SAFETY INSTRUCTIONS
Warning! When using electric tools, basic safety pre-
cautions should always be followed to reduce the
risk of fire, electric shock and personal injury, inclu-
ding the following. Read all these instructions before
attempting to operate this product.
Retain for future refence.
1. Keep work area clean
Cluttered areas and benches invite injuries.
2. Consider work area environment
Don’t expose power tools to rain. Don’t use power
tools in damp or wet locations. Keep work area well
lit. Don’t use power tools in presence of flammable
liquids or gases.
3. Guard against electric shock
Prevent body contact with grounded surfaces (e.g.
pipes, radiators, ranges refrigerators).
4. Keep children away
Do not let visitors contact tool or extension cord. All
visitors should be kept away from work area.
1
2
6
4
3
5
Voltage
| 230 V~
Frequency
| 50 Hz
Power consumption
| 90 W
Speed count w/o load/min
| 1440
Max saw depth 90°
| 50 mm
Max saw depth 45°
| 15 mm
Weight
| 15 kg
Lpa (sound pressure) w/load
| 62.6 dB(A)
Lpa (sound pressure) w/o load
| 66.4 dB(A)
Powercraft
7
EXPLODED VIEW
