powercoup EP1700, Руководство пользователя

Страница: 15 / 24

Réf. NOTPW2EP1700 14 Indice 01.
RECOMMANDATIONS
Keep your work area tidy.
Untidiness in the work area increases the risk of accidents.
Take the work area environment into account.
Don’t expose electrical tools to the rain. Don’t use electrical tools in a humid or wet environment.
Make sure the work area is well lit. Don’t use electrical tools if there are flammable liquids or gases in
the vicinity.
Protect yourself against electrical discharge.
Avoid bodily contact with grounded surfaces, such as, for example: battery charger, multiway
electrical sockets, etc.
Keep children away!
Don’t allow other people to touch either the tool or the power cord. Keep others well away from your
work area.
Store your tools in a safe place.
Tools not in use should be stored in a dry, enclosed place, in their original packaging and out of the
reach of children.
Wear suitable working gear.
Do not wear flowing clothes or jewelry. These could get caught up by moving parts. When working
outdoors, it is recommended that you wear rubber gloves and shoes with non-slip soles. Use a hairnet
if you have long hair.
Wear protective goggles.
Use a mask as well if the work you are doing produces dust or debris.
Take care of the lead.
Never carry the charger by its power cord, and so not pull on the power cord to unplug it. Keep the
power cord away from heat sources, oil or sharp edges.
Take good care of your tools.
Regularly check the condition of the power cord and plug, and have them changed by an approved
specialist if they show any signs of damage. Keep the POWERCOUP PW2 material dry and free of oil
and grease.
Remove the tool keys.
Remove any adjustment keys before switching on the tool.
Check whether your tool is damaged.
Before using the tool, carefully check that the safety features are in perfect working order and whether
any parts have been even slightly damaged.
Have your tool repaired by a specialist.
This tool is compliant with the safety regulations in force. All repairs must be carried out by an
authorized service provider (ASP) or by INFACO and exclusively using original parts. Parts which
are not original may seriously risk the safety of the user.