P A G E 1 4
Troubleshooting
PROBLEM: Low or No Output Voltage
PROBLEM: Overload LED Stays ON
Reason Solution
Poor contact with the battery
terminals
Clean terminals thoroughly
Using incorrect type of voltmeter
to test output voltage
Use true RMS reading meter
Reason Solution
Battery voltage below 10.5V
Recharge or replace battery
Equipment being operated
draws too much power
Use a higher capacity inverter or do
not use this equipment
Inverter is too hot (thermal
shutdown mode)
Allow inverter to cool
Check for adequate ventilation
Reduce the load on the inverter to
rated continuous power output
Unit may be defective
See warranty and call customer
service
