This diagram shows a Flipbox LSM-20 running 20 lights in 2 different rooms. Ten ballasts supply output to the Flipbox, which switches back-and-
forth between the lights in each room at a time you specify when you program the digital timer in the Flipbox. A Powerbox DPC-15000 Lighting
Controller supplies 240-volt power to run the ballasts and also allows you to program a rest period for the ballasts during each Flip cycle. The
Powerbox connects to a 4-wire, 240-volt main connection that supplies 50 or 60 amps of power.
FLIPBOX
LSM - 20
LIGHT SWITCHING MODULE
POWER
BOX
FLIP TIMER
TIMER ON - BANK ‘B’ ON
TIMER OFF - BANK ‘A’ ON
240-Volt Main
Connection
POWER
BOX
ON / OFF
POWER
BOX
ON
??
ON
ON
ON
??
??
??
20 Light/10 Ballast
DPC-15000
Flipbox switches ballast output
back and forth between 2 rooms
each 12 hrs.
FLIPBOX
LSM-20 HOOKUP DIAGRAM
Lights in Room A on for 12 Hours
Lights in Room B on for 12 Hours
Timer initiates the
changeover from
Room A to Room B
120-Volt Main
Power Cord
Optional 120-Volt
Trigger Cord
Flipbox cords plug
into ballast output
Ballast power cords
plug into lighting controller
Powerbox Lighting Controller
Row B Lamp Inputs
Row A Lamp Inputs
Lighting Controller is used to supply
ballasts with 240V power and to
turn ballasts off for 10 mintues every
12 hours, when the flip occurs
Ballasts
