-12-
To change the output voltage:
- Connect both batteries and switch the
PowerBox Evolution Spektrum
on
- Now disconnect both batteries from the
PowerBox Evolution Spektrum
- Press the SET button and hold it pressed in
- With the SET button pressed in, reconnect Battery 1 and Battery 2
- The selected setting is indicated by the LED monitor on the
PowerBox
: all the
LEDs on the appropriate side light up:
1 x
flash means that the regulator is now operating at 5.9 V
3 x
flashes means that the regulator is now operating at 7.4 V
The output voltage is switched by a toggle process. Example: the set voltage is
5.9V; if you connect the batteries with the SET button pressed in, the output voltage
changes to 7.4 V, and the LEDs flash three times. If you wish to revert to 5.9 V, you
must disconnect the batteries and repeat the procedure.
Caution:
it is essential that both regulators are set to the same voltage. If you set
only one regulator to 7.4 V, the voltage at the output is 7.4 V.
