PowerBoss SW5X, Инструкция по эксплуатации

Страница: 35 / 112

Before checking:
Mark level surface for che-
cking broom adjustment by
chalk.
- Secure machine by engaging par-
king brake.
- Lower cylinder broom and let it run
dry.
- Lift cylinder broom and forward the
SW5X a bit.
With the correct broom adjustment
the parallel sweeping marks have
to appear on the floor (sweeping
track).
The sweeping track width is to be
1.97 in. (50mm) with the SW5X
The sweeping track width can be
adjusted at the star-shaped knob
(Fig. 15/2) as follows:
Broom adjustment
- Stop engine and pull key
- Engage parking brake
- Open seat hood
- Loosen handle (Fig. 16/3)
- Turn star-shaped knob (Fig. 16/1)
to the left = wider sweeping track
to the right = smaller sweeping
track
- Fix handle (Fig. 16/3)
- Broom adjustment sticker (Fig.
16/2)
With one full turn of the
knob, the track widens or
broadens by approx.
0.4 in. (10 mm)
When exceeding the swee-
ping track width the cylin-
der broom wearing increa-
ses as well as the load of
the drive.
Fig. 17 Broom adjustment
sticker (in Fig. 17/2)
Maintenance/Service
Fig.16
Fig.17
35