PowerBoss PHX26ECO, Руководство пользователя

Страница: 34 / 40

34
Troubleshooting
Problem Possible Cause Remedy
Poor water pick-up
Worn or torn squeegee blades Rotate or replace blades
Recovery tank full Empty recovery tank
Recovery tank drain hose leak Secure drain hose cap or replace
Recovery tank lid gasket leak Replace gasket lid cover properly
Debris caught in squeegee Clean squeegee
Recovery hose clogged Remove debris and flush hose
Recovery hose to squeegee or tank
disconnected or damaged Reconnect or replace recovery hose
Poor scrubbing performance
Worn brushes Rotate or replace brushes
Wrong brush or cleaning chemical Consult PowerBoss
Debris caught on scrub brushes Remove debris
Moving machine too fast Use appropriate speed
Low battery charge Recharge batteries
Not using enough solution
Adjust solution flow setting
Inadequate solution flow or
no solution to the floor
Solution tank empty Fill solution tank
Solution lines or filter clogged Flush lines and clean solution filter
Brush motor circuit breaker has tripped Reset circuit breaker
Solution Lever in down position Raise lever up
Machine does not move
Squeegee is down and directional
switch is in reverse position Raise squeegee when in reverse
mode
Traction drive circuit breaker has tripped Reset circuit breaker
Batteries lost power Recharge batteries
Directional switch in neutral position Activate FWD or REV position