PowerBass XMA-1205D, Руководство пользователя, Страница: 26 / 28

SPECIFICATIONS FOR XMA CLASS D MONO AMPLIFIERS
PowerBass Xtreme Class D Model XMA-1205D XMA-2000D
Power Output @ 14.4 VDC Input
1 Ohms RMS at THD <0.4% 1200 x 1 2000 x 1
2 Ohms RMS at THD <0.4% 800 x 1 1400 x 1
4 Ohms RMS at THD <0.4% 500 x 1 700 x 1
Peak Music Power 2400 watts 4000 watts
External Bridged 2 Ohms RMS 2400 x 1 4000 x 1
Signal to Noise Ratio (EIA Rated) > 100dB > 95dB
Frequency Response 10Hz - 300Hz 10Hz - 300Hz
Crossover
Low Pass Filter 25Hz - 250Hz 25Hz - 250Hz
Crossover Slope 24dB 24dB
Sub Sonic Filter 10Hz - 50Hz 10Hz - 50Hz
Variable Bass EQ 0 - 18dB 0 - 18dB
Bass Frequency 40Hz - 100Hz 40Hz - 100Hz
Input Gain Control 250mV - 10.0 V 250mV - 10.0 V
Fuse Rating / Style 40A x 3 150A (see below*)
Dimensions
Width (W) x 7.1" (180mm) 7.1" (180mm)
Height (H) x 2.0" (51mm) 2.0" (51mm)
Length (L) mm 14.7" (374mm) 18.3" (464mm)
IMPORTANT NOTES:
•
Due to continuing improvements these specifications are subject to change without any notice.
• Do not attempt to fix or repair this unit. Unauthorized repairs will void the manufacturer’s warranty.
* FUSE NOTE: Due to space limitations, the XMA-2000D does NOT use chassis mounted protective fuses. There-
fore you must add a fuse and fuse holder (not included) rated at 150A for each XMA-2000D installed.