background image

SOUND CHECK

Your PowerBass Air Suspension Subwoofer system will operate at optimum performance after a break-in 
period.  Allow the system to play 20 to 30 hours at moderate levels.  To sufficiently drive either the Single 
Woofer 10 or 12-inch system, we recommend using an amplifier with at least 150 watts RMS mono 
output.

CAUTION: Damage to the woofers can occur when an amplifier, regardless of its wattage, is made to play 
at higher listening levels than its power can clearly produce (usually beyond the “1 to 2 o’clock” position 
on the volume control). This results in very high levels of audible distortion. Contrary to popular belief, a 
speaker is more likey to be damaged by trying to get too much volume from a low-powered amp than 
from a high-powered amp.

NOTE: Lack of bass output is usually caused by the subwoofer being out of phase with refer-
ence to the rest of the system.  In this case reversing the speaker connection from positive to 
negative on the terminal cup will correct the problem.

CARE AND CLEANING

The enclosure is constructed of the same non-resonant material used for premium quality home audio 
speakers, but covered in vinyl instead of veneer.  A damp cloth is best to wipe down any dirt on its surface.  
Avoid using strong cleaners that may discolor the vinyl wrap.  Never apply water or cleaner to the woofer 
cones.

8

Содержание PS-WB101T













Отзывы: