PowerBass ACA-250.1, Руководство пользователя

Страница: 6 / 24

CONTROL PANEL LAYOUT
NOTE: Panel Layout and Controls may differ by model.
1. REMOTE LEVEL
This is the connector port for the Remote Gain Control. Now the amplifiers secondary gain circuit can be
adjusted from the driver’s seat.
2. HIGH INPUT
Allows you to connect speaker output from factory radio to amplifier without the use of a low level convertor.
3. LINE IN (RCA) Jacks
These RCA style input jacks are for use with source units that have RCA line level outputs. A source unit with a
minimum output of 250mV is required for proper operation. However, this input will accept levels up to 6Vrms.
4. BASS EQ Switch
This equalization circuit is used to enhance the low frequency response of the vehicle’s interior. Selectable for
6 or 12dB of boost centered at 45Hz, the BASS EQ can be adjusted to meet your own personal taste.
Fig.2 Panel Layout