PowerBass 4XL-151D, Инструкция по применению

Страница: 11 / 16

11
PARAMETERS FOR POWERBASS 4XL-151D SUBWOOFER
(Due to Constant Improvements, Specifications and Parameters are subject to change without notice.)
4XL-151D
DCR VC Impedance (ohms) 0.70
Test Impedance (ohms)
1.40
Fs (Hz) 34.95
SD (sqCM)
855.0
Vas (Ltr)
34.95
Cms (µM/N) 33.66
Mms (g)
619.7
BL™ 22.24
Qms
3.602
Qes 0.384
Qts
0.347
No (%) 0.371
1-W Spl (dB)
87.85
Xmax (mm)
28
Voice Coil Size (inches)
4.0 (101.6mm)
Frequency Response (Hz)
30-500
Magnet Weight (ounces) 640 oz. (40 lbs)
Mounting Depth (inches)
11.25" (286mm)
Speaker Displacement 0.232 cu.ft
Power (RMS/Peak)
3,500 / 7,000 watts
POWER RECOMMENDATIONS
Many speaker and amplifier brands measure their power ratings in different ways. Often the stated “Max Power handling” are viewed as
continuous RMS power handling of the speaker, when actually the “Max” is generally the breaking point of the speaker.
In an effort to minimize any confusion, PowerBass has chosen to rate our Super Subs in the following manner:
NOMINAL POWER HANDLING
Playing your woofer at levels below the Pe-RMS spec will allow the woofer to operate at optimum
conditions and cause the speaker minimal mechanical degradation over time.
Pe-RMS POWER HANDLING
Pe-RMS is the highest power rating we assign the woofer for continuous use under normal conditions.
Exceeding this power level for extended durations will result in mechanical degradation that may lead to possible failure over time.
Pe-MAXIMUM POWER HANDLING
Pe-Maximum is the maximum power rating the woofer can handle for short bursts or peak
transients with clean input power. Exceeding this power level or using dirty (distorted input power) will cause thermal failure that will void
the speaker warranty.