PowerBass 3XL-63C, Руководство пользователя

Страница: 10 / 16

3XL-63C COMPONENT SYSTEM INSTALLATION
3XL Component Midrange
The proper installation procedure for mounting these high performance midbass speakers is to secure the
speaker to the vehicle’s speaker mounting hole. Once the speaker is in place, determine if the supplied
grill needs to be installed. If so, place the grill in place over the speaker and screw the speaker into the
mounting hole.
These high quality silk dome tweeters come complete with several mounting housings for installation
versatility. Once you have chosen the housing that is to be used, gently press the tweeter into the proper
mounting cup. Experiment with the tweeter positioned in several locations to determine the best imaging
result before cutting out any panel. Typically tweeters should be mounted on axis and as close to ear
level as possible. If the tweeter has to be removed from the mounting cup, insert a small screwdriver in
the back of the tweeter and carefully push the tweeter from the mounting cup. The following page con-
tains possible mounting diagrams for the component tweeter and woofer. (Note: The crossover features
a -3/0/+3 attenuation switch)
SPECIFICATION FOR POWERBASS 3XL-63C TWEETERS
(Due to continuing improvement, specifi cations and parameters are subject to change without notice)
Size Nominal
Impedance
Frequency
Response
Sensitivity
1W/1M
Crossover
Attenuation
Mounting
Depth
Mounting
Diameter
Power
RMS/Max
1”
(25mm)
4 Ohm 3.5K - 21 kHz 92 dB -3/ 0 /+3 7/8”
(22mm)
2.0”
(50.3mm)
60W / 120W