PowerBass 3XL-50C, Инструкция по применению

Страница: 8 / 16

Custom Installation
Should you decide to install your PowerBass speakers in locations other then those provided by the
automaker, make certain that the location you choose is clear of all obstructions in front of and be-
hind the panel. If it is necessary to cut any metal, take care to insure you do not weaken the vehicles
structural integrity. Use the mounting template supplied with your speakers and pay close attention
to the mounting depth listed on the diagram.
PowerBass Xtreme Component Tweeter
These high quality tweeters come complete with several mounting housings for installation versatil-
ity. Experiment with the tweeter positioned in several locations to determine the best imaging result
before cutting out any panel. Typically tweeters should be mounted on axis and as close to ear level
as possible. Once a suitable location has been found then you can evaluate your mounting options
shown on the next page.
3XL COMPONENT TWEETER SPECIFICATIONS
DOME
SIZE (25mm)
MOUNTING
(DIAMETER)
NOMINAL
IMPEDANCE
FREQUENCY
RESPONSE
SENSITIVITY
(1M / 1M)
MOUNTING
(DEPTH)
POWER
(RMS/PEAK)
1.0” Titanium 1 7/8” 4
Ω
4.2K-25Khz 92 dB 7/8” 60/120
INSTALLATION PROCEDURES
By mounting the tweeter separately from the woofer (or mid-range driver) the installer can choose
the best location for sound quality and imaging. Optimum results are usually obtained by locating
the tweeters and midrange speakers relatively close to each other, and by keeping the sound path
lengths between the listener and the left and right speakers as equal as possible. Three mounting
types are possible allowing more versatility for the tweeter location. These are flush mount, surface
mount, and angle mount.