14
15
5. Put the cable strain relief on the upper handle bar, just under
the switch box, then align the upper handle bar with the middle
handle bar and secure them with one mounting set on each
side.
6. Fix the cable with the cord clips to the handle bar.
Preparation
Settle the power cord
The power cord should be wrapped around the cable strain relief to
avoid long lines stumbling pedestrians or causing electric shock.
Ensure no children or pets are close to the machine when in use.
Install correct cutting device
The machine is fitted with a scarifying cylinder blade before
delivery.
For scarifying
Correct cutting blade fitted already thus no need for extra
installation.
For raking
First, disassemble the scarifying cylinder blade before fitting the
raking blade.
1. Place the product upside down on a flat stable surface to have
access to the under-body.
2. Loosen the two bolts with an Allen key, remove them together
with the spring washers.
3. To remove the cutting device, first lift the bearing and then pull it
out from the drive shaft.
