18
WARNING!
Ensure the power cord is disconnected from the
mains supply before adjusting the cutting height.
• Place the lawn mower on its side.
• Grasp the wheel axle (18) on both sides (Fig. 9).
• Pull evenly on the axle and let it snap into the desired position (Fig. 9).
• The correct height is around 20–40mm for a decorative lawn and
around 40–60mm for a used lawn.
NOTE:
A higher cut height should be selected for the first cut of the season.
WARNING!
Keep the front and rear wheels at the same height.
The electric lawn mower can be adjusted to the following cutting heights
with three position changes of the front and rear axles (18):
60mm
- Tall cutting height
40mm
- Medium cutting height
20mm
- Short cutting height
1. Hook the mains cable through the cable strain-relief (15) (Fig. 10).
2. Connect the mower to your power supply.
Setting the cutting height
Connecting to the power supply
Operation
Fig. 9
18
18
