Functions
I
、
Active/Inactive the lamp (see the figure 1)
1. Touch the switch button to activate the lamp ,and the lamp will be lighted at this
time but the blue light above the switch is not lit up at the same time.
2. When the lamp is on,a touch on the switch button will inactivate the lamp, and
the blue light above the switch will shine for one second .
Input: DC5V/1A
Flux: 3-325Lm
Color temperature: 2900K
Net weight: 379g
Operating temperature: -10
℃
~50
℃
Type of battery: Li Polymer Battery
Size: 6.61*2.87in
Battery capacity: 2600mAh
LED lamp power: 0.03-3.9W
Material :PC+ABS
II
、
Turn ON/OFF the lamp(see figure 2)
1. Light on: Sweep your hand over it to turn it on.
2. Light off: When it’s on, sweep your hand sweep over it to turn it off.
III
、
Adjust the brightness(see figure 3)
When the Lamp is on, put your hand over it within 9.84in(25cm), and
move your hand closer and higher to the lamp to adjust its brightness
automatically. Move you hand away when the brightness is satisfactory.
IV
、
Low battery notice
When the blue breathing light around the lighting area is on, it means
the battery can only last for another 10-20 mins,please charge it soon.
V
、
Charging
1. During charging, the red indicator is constantly on, and it would go off when
charging is finished.
2. The charging usually takes 3-4 hours.
3. The lamp will works for 3-120 hours after a completely charging, depending on the brightness
used.
9.84in
NOTE: You need to touch the switch button to active the lamp first.
1.Charging indicator
2.USB charging port
4.LED lamp area
5.Motion sensor location
6.Logo area
7.Hanging string
3.Touch switch button
Specifications
NOTE
：
The sense distance of the lamp is 9.84in(25cm). There should be no
object within 25cm over the lamp.
How to use?
1
2
