Drill safety warnings
1) Safety instructions for all operations
a)
Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
b)
Use the auxiliary handle(s).
Loss of control can
cause personal injury.
c)
Brace the tool properly before use.
This tool
produces a high output torque and without properly
bracing the tool during operation, loss of control may
occur resulting in personal injury.
d)
Hold the power tool by insulated gripping
surfaces, when performing an operation where
the cutting accessory may contact hidden wiring.
Cutting accessory contacting a “live” wire may make
exposed metal parts of the power tool “live” and could
give the operator an electric shock.
2) Safety instructions when using long drill bits
a)
Never operate at higher speed than the maximum
speed rating of the drill bit.
At higher speeds, the
bit is likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal injury.
b)
Always start drilling at low speed and with the bit
tip in contact with the workpiece.
At higher speeds,
the bit is likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal injury.
c)
Apply pressure only in direct line with the bit
and do not apply excessive pressure.
Bits can
bend causing breakage or loss of control, resulting in
personal injury.
Screwdriver safety warning
Hold the power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring.
Fasteners contacting a
“live” wire may make exposed metal parts of the power
tool “live” and could give the operator an electric shock.
- 6 -
TECHNICAL SPECIFICATIONS
DRILL/SCREWDRIVER SAFETY WARNINGS
PRODUCT CODE
HD05
BATTERY
20Volt_max Li-ion
GEARS
2
NO LOAD SPEED
0-350, 0-1300
TORQUE SETTINGS
16+1+1
DRILLING CAPACITY:
STEEL
13mm (½”)
WOOD
32mm (1.1”)
CONCRETE/MASONRY
13mm (½”)
HAMMER FREQUENCY
0-4550, 0-17550 min
-1
CHUCK CAPACITY
13mm (½”)
WEIGHT WITH UNIGRIP AND
BATTERY
1.57kg (bare tool)
DRILL/SCREWDRIVER SAFETY WARNINGS
