Power YP 51300-15KWH, Руководство пользователя, Страница: 9 / 26

version 3.0 : 2021/7/29
- 8 -
www.youth-power.net
Temperature, Over
current, Short
circuit, Reverse
connection, Failure
protection
OFF ON OFF OFF OFF OFF OFF OFF
Stop
discharging
Fault
/ OFF ON OFF OFF OFF OFF OFF OFF
Stop charging
or
discharging
⚫
Chart 2: Battery Capacity
Status Charging Discharging
Capacity LED Indicator
L6 L5 L4 L3 L2 L1 L6 L5 L4 L3 L2 L1
Capacity
0
～
16.6% OFF OFF OFF OFF OFF Flash OFF OFF OFF OFF OFF ON
16.6
～
33.2% OFF OFF OFF OFF Flash ON OFF OFF OFF OFF Flash ON
33.2
～
49.8% OFF OFF OFF Flash ON ON OFF OFF OFF Flash ON ON
49.8
～
66.4% OFF OFF Flash ON ON ON OFF OFF Flash ON ON ON
66.4
～
83.0% OFF Flash ON ON ON ON OFF Flash ON ON ON ON
83.0
～
100% Flash ON ON ON ON ON Flash ON ON ON ON ON
RUN Status
NO Flash
3.4.
Connectors
Charge / Discharge connectors: to connect the positive pole (+) and negative pole (-) from the battery
to the inverter via DC isolator.
Canbus / RS485: Active communication portal between battery and inverter.
USB To RS232: to get dynamic monitoring data of the battery from upper computer.
Address: Reserved Address portal for multiple parallel connections.
3.5.
Wake Up button
⚫
Battery On: When battery is shut down, press this RST button for 3 seconds. It is activated
when the LED lights flicker from RUN light to the lowest capacity indicator.
⚫
Battery off: When battery is activated, press this button for 3 seconds. It will be shut down
when the LED lights flicker from lowest capacity indicator to RUN light.
⚫
Different LCD version can be applied as per request --- Normal press LCD or finger touch
LCD.