When the supporting feet is blocked,
When the supporting feet is blocked,
When the supporting feet is blocked,
When the supporting feet is blocked,
never attempt to
never attempt to
never attempt to
never attempt to
take it out by striking with a tool.
take it out by striking with a tool.
take it out by striking with a tool.
take it out by striking with a tool.
This may break the
This may break the
This may break the
This may break the
motor assembly.
motor assembly.
motor assembly.
motor assembly.
Sharp
Sharp
Sharp
Sharpening the Wedge
ening the Wedge
ening the Wedge
ening the Wedge
1.
After long periods of operation, and when required;
sharpen the wedge using a fine-toothed file and carefully
removing and burrs of flat spots on the edge.
Warning!
Warning!
Warning!
Warning!
Be sure to unplug the power before any maintenance work!
Changing the Hydra
Changing the Hydra
Changing the Hydra
Changing the Hydraulic Oil
ulic Oil
ulic Oil
ulic Oil
(The quantity of the hydraulic oil and recommended type
(The quantity of the hydraulic oil and recommended type
(The quantity of the hydraulic oil and recommended type
(The quantity of the hydraulic oil and recommended type
have been indicated on page 5).
have been indicated on page 5).
have been indicated on page 5).
have been indicated on page 5).
1.
Make sure the LOG PUSHER (B in Figure 1) is fully
retracted.
2.
Unscrew the DIP STICK(10)and remove it together with
O-type oil seal(11).(Figure 6)
3.
Position a container under the Log Splitter that will
hold at least 4 liters of oil .Then tilt the machine to
empty the oil into the container.
4.
Tilt the Log Splitter the other way, with the oil
Fill/Drain Port (in Figure 7) up. Using a clean funnel
pour the hydraulic Oil into the hydraulic oil cylinder
