Pecolift Tower
INTRODUCTION
The Pecolift Tower is a simple, safe and efficient alternative to
step-ladders, platform/podium steps and small scaffold towers.
The Pecolift is the first non-powered, powered access platform.
It does not require batteries (or charging) or connection to an
electricity supply. It works by a unique, patented stored power
mechanism which enables the platform to be elevated with very
little effort by the operator.
The Pecolift is designed for working internally on flat, level
surfaces, and as it has no batteries, electric motor, electrics or
hydraulics it is very ecologically friendly. It is ideally suited to
working in a very wide range of applications from the very ‘clean’
environments of hospitals, food and drinks production facilities,
pharmaceuticals and retail, to facilities maintenance, shop-fitting
and construction and even on zone 1/21 hazardous areas.
The Pecolift is suitable for any application provided it is used
within its specified operating parameters. If used for applications
such as sand blasting, welding, paint spraying or with any other
hazardous materials, measures must be taken to ensure the
Pecolift does not become damaged in any way which may
impair safety, or reliability. Additional protection for the operator
may be required in some cases, which is the responsibility of the
operator and/or the operator’s employer.
OPERATING DIMENSIONS
Maximum Working Height:
3.50m
Maximum Platform Height:
1.50m
Platform Dimensions:
720 mm (L) x 600 mm (W)
Working Foot Print:
985 mm x 700 mm
Safe Working Load:
150 Kg (1 tools)
Maximum Manual Force:
200N
Maximum Gradient for Operation:
0 degrees
Maximum Wind Force:
Internal use only, 0(zero mph)
Maximum Wheel Force:
125 kg
Maximum Castor Point Load:
125 kg (1.23kN)
Sound Pressure Level:
Less than 70dB(A)
CLOSED DIMENSIONS
Length
985 mm
Width:
700 mm
Height:
1.550 m
Weight:
180Kg
