Power Solid PSSi3600W 580VK, Руководство пользователя

Страница: 46 / 95

3Installation
PV Energy Storage Inverter PSSi
（
3600-6000W
）
#580VK
Series
User Manual
38
Switch off the DC switch and external DC switches before connecting the PV array.
Ensure that the connection between PV array and the inverter at positive pole and negative pole
is correctly.
The DC input voltage should be less than the max. input voltage of the inverter.
It's forbidden to connect the grounding wire with positive pole or negative pole of PV array, or it
will lead to inverter damage.
Use the equipped PV connector and metal terminal to connect the PV input. The PV connecter
includes positive connecter and negative connector, they match the corresponding positive metal
terminal and negative terminal, corresponding procedure as follows.
Step 1 Strip the insulation layer ofpositive wire and negative wire for about 7mm, as shown in Figure3-26.
Figure3-26 Stripping diagram of DC input (unit: mm)
It is recommended to use red wire as the positive wire, use black wire as negative wire to avoid wrong
connection. If using the wires of other colour, please confirm the corresponding connection relationship.
Step 2 Unscrew the lock nut of positive and negative connection, lead the positive and negative wires go
through corresponding lock nut, and then insert the positive wire and negative wire into the positive
metal terminal and negative metal terminal respectively. Crimp the metal terminals firmly by
crimping pliers, as shown in Figure3-27.
Figure3-27 Crimp the metal terminal
Step 3 Insert the positive wire and negative wire into corresponding insulation crust respectively. If there
has a click sound, it means that the wire have been inserted properly, as shown in Figure3-28.