POWER SMITH PTLK516-130, Руководство оператора

Страница: 4 / 16

FIG 3
1
.取出样品
1
.取出样品
2
.悬挂
3 .悬挂完成,检查安装无误
4
,将发光面旋转到所需要的角度
FIG 4
4
English
ADJUSTING LIGHT BEAM
The light has 4 light panels which pivot to adjust the light beam from 360° to 180°. See Figure 3.
DAISY-CHAIN POWER OUTLET
The light is equipped with a cable power outlet for daisy-chaining. Do not overload the outlet. Refer to Specifications
Section for outlet power capacity.
TURNING ON/OFF THE LIGHT
The light has no switch. Plug into power outlet to turn on the light. Unplug to turn off the light.
MAINTENANCE
Your work light requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive cleaner.
WARNING:
Always make sure the work light is unplugged and
completely cool before attempting to clean it.
WARRANTY
This product is warranted free from defects in material and workmanship for 5 (Five) years after date of purchase. This
limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is
covered by this warranty and it is not transferable. Prior to returning your product to store location of purchase, please call
the Toll-Free Help Line for possible solutions.
HELP LINE
For questions about this or any other
PowerSmith
™ product,
Please call Toll-Free:
888-552-8665
Or visit our website:
www.powersmithproducts.com
©Richpower Industries, Inc. All Rights reserved
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC 29697
Printed in China, on recycled paper