Power Products CERVASCAN, Инструкция по эксплуатации

Страница: 47 / 91

44
Englis
h
6.4 Oil alarm system.
The oil alarm system is designed to avoid engine damages caused by an
insufficient amount of oil or pressure in the crankcase. Before the oil level in the
engine crankcase is below the safety limit, the oil alert system will shut the engine
down automatically.
NOTE: Oil protection must be considered of extreme safety. It is the sole
responsibility of the user to check the oil level before each use as indicated in the
manual. It is unlikely for this safety to fail, but if it does, damage in the engine
would be very significant. The client would be solely responsible for lack of
maintenance and repair would be excluded from the warranty.
Remember that it is a safety alarm in case of critical level, it is not a low oil level
indicator.
IMPORTANT: The alert system only acts when there is a lack of pressure, it does
not protect in case of inadequate oil, if it is in bad condition or the oil filter is
blocked (it must be replaced every 200 hours, see maintenance chapter)
7. Stopping the engine
To stop the engine in case of an emergency , turn the engine switch off by
pressing to the "OFF" position.
Normal engine shutdown:
1
Unplug the electrical devices plugged to the generator.
2
Place the engine's switch to the “OFF” position
3 Turn the fuel valve to the Left, "OFF" position.
ENGINE SWITCH
FUEL VALVE