manualshive.com logo in svg

Power Probe ECT3000, Руководство пользователя

Поделиться
Скачать
Power Probe ECT3000 Скачать руководство пользователя страница 8

Characteristics of the Short/Grounded Circuit Signal:

1. Strongest when flowing exclusively through one wire

When the signal is conducting through only one wire, the signal

strength is at its maximum because 100% of the signal is travel-

ing through that wire exclusively to return back to the negative

side of the battery. If the signal branches out to parallel circuits,

its strength divides and of course is weaker in each branch of

the divided circuit. But when the signal recollects through the

single negative cable to return to the battery, the signal strength

is at its maximum again because 100% of the signal is concen-

trated through the single negative battery cable. (see “Isolate the

Circuit You are Tracing” pg. 18)

2. Travels the path of least resistance

In case of a short circuit that blows its fuse reliably, you can

sometimes get away with not having to isolate the circuit. The

majority of the signal will follow the path of least resistance

through the short and then back to the battery. In fig.1, you can

see the majority of the signal travels right to the short circuit.

You can also see only a small portion of the signal running

through parallel wires.

3. A 4 KHz Polarized Signal

The fact that the Grounded Circuit signal is a 4 KHz polarized signal provides directional information for the receiver to pick up. This capabili-

ty to indicate the direction to the short or ground takes the guesswork out of tracing grounded circuits. (See “Direction to the Short” pg. 15)

4. Carries a current of only 100 mA.

When generating a Short/Grounded Circuit signal, a maximum of 100 milliamp flows from the signal lead. This keeps you safe from damaging

sensitive computer circuits.

8

Path of Least Resistance

Major portion of signal goes 

into short (ground)

Very small traces of signal 

branch into parallel circuits

Lights have resistance 

and limit signal flow

Содержание ECT3000





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды