C-MONSTER TOP SIDE PROGRAMMING
INSTRUCTIONS
Need help? Contact our Technical Support Team at
1 + 813.689.9932 Option 2
©2017 all rights reserved. Power-Pole Shallow Water Anchor U.S. Patent No. 6,041,730
Function 1:
Setting HPU (Hydraulic Pump Unit) as single, or port,
or starboard units (duals)
• Set as a single HPU: Press and hold both UP and DOWN
buttons simultaneously.
• Set as starboard side HPU: Press and release the UP button.
• Set as port side HPU: Press and release the DOWN button.
Once you have made all desired setting changes, press and
release the PROGRAM button to save your settings and exit
program mode. You will hear a series of beeps and the LED
light will return to flashing green.
IMPORTANT:
When using only one anchor, do not program as a port or starboard.
Pair additional C-Monster controllers
(up to 10 controllers can be paired to a single HPU)
1. Press and hold the PROGRAM button on the HPU for 3 seconds. A solid green light and a single beep
will confirm that it’s in pairing mode.
2. Press the UP button on the C-Monster controller for one second and release. A beep will sound to confirm that a new
key fob has been paired.
NOTE:
A single C-Monster Controller can be programmed to multiple anchors.
Press both to set for Single Unit
Starboard
Port
