POWE40030
EN
Copyright © 2020 VARO
P a g e
|
7
www.varo.com
9 TECHNICAL DATA
Rated voltage
230 V
Rated frequency
50 Hz
Rated power
450 W
Rotation sped
6000-13000 min
-1
Disc diameter
125 mm
Cable length
2 m
Carbon brush motor
Yes
Oscillation speed
12000-26000min
-1
Electronic speed control
Yes
Soft grip
Yes
Hook & loop system
Yes
Self-dust function
Yes
Power on LED light
Yes
10 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
80 dB(A)
Acoustic power level LwA
91 dB(A)
ATTENTION! Wear hearing protection when sound pressure is
over 85 dB(A).
aw (Vibration)
5.6m/s²
K = 1.5 m/s²
11 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug.
11.1
Cleaning
▪
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪
Regularly clean the machine housing with a soft cloth, preferably after each use.
▪
Keep the ventilation slots free from dust and dirt.
▪
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
12 SERVICE DEPARTMENT
▪
Damaged switches must be replaced by our after-sales service department.
▪
If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
