Power Plus GLYDER, Руководство пользователя

Страница: 13 / 16

CASTERS
Your casters are made of injection molded nylon and will not rust.
They are also fitted with sealed precision bearings (10) which
require no lubrication.
Axle Adjustment on the caster
bearings, although not critical, may
also improve the performance. The
axle nut should be adjusted to
produce a smooth free running
caster without side play. Again do
not over tighten as this will damage
the bearings.
If fluttering or pulling is
experienced, your stem bearings
(9) may need adjustment or
replacements. To adjust flip chair
back onto its push handle and
remove the dust caps (1) on the
caster sockets. Tighten the fork
stem nut (2) clockwise while
holding the caster assembly.
Check for smooth easy turning
without side or end plays while
adjusting, do not over tighten as
this may damage the bearings.
Number Description Quantity
1 Dust Cap 2
2 ½ ” Lock Nut 4
3 Fork Stem 2
4 Caster Fork 2
5 5/16” x 2 ¾ ” Bolt 2
6 5/16” x 1/8” Plastic
Washer
4
7 5/16” Lock Nut Thin 2
8 Caster 2
9 Stem Bearing 4
10 Sealed Bearing 4
2
9
7
3
4
1
2
5
8
10
6