Power One SFP450 Series, Руководство по программированию

Страница: 9 / 21

All rights strictly reserved. Reproduction or issue to third parties in any form is not permitted without written authority from Power-One.
Title
Issued 2006-05-19 SKl
Modified -- --
Mech. Eng. approved -- --
Marketing approved
SFP450/600 I
2
C Interface Programming
Manual
Mfg. approved --
Size Scale Sheet Drawing No. Revision
www.power-one.com
A4 9/21
BBA20005-G 001
Supersedes: -
5.1.2 How to read an EEPROM data block
1) "Start condition" from Master
2) Master sends "Device address" with "write attribute"
3) "Acknowledge" from Slave device (SFP450/600-S102)
4) Master sends "EEPROM address"
5) "Acknowledge" from Slave device (SFP450/600-S102)
6) "Repeated start" from Master (Sr/S)
7) Master sends "Slave address" with "read attribute"
8) "Acknowledge" from Slave device (SFP450/600-S102)
9) Slave sends "Data byte"
10) "Acknowledge" from Master (power management system)
n-time repetition of step 9) and 10)
11) Slave sends "Data byte"
12) "Not Acknowledge" from Master (power management system)
13) "Stop condition" from Master
S Slave Adr. W A EEPROM Adr. A Sr/S Slave Adr. R A Data Byte A
8 bit 8 bit 8bit 8 bit
….
….
Master
Slave (SFP450/600 EERPOM)
Data Byte A
8bit
Data Byte /A P
8 bit
Start Condition
Ack bit
Ack bit
Ack bit
Ack bit Stop
Condition
not Ack bit
Ack bit
Start Condition