Power One PODS 16.48-16000 1940 HEX, Инструкция по эксплуатации

Страница: 67 / 170

Product description PPR 16/10 23” Subrack 10-3
Document number: 037680.fm
Revision: B
Product description PPR 16/10 23” Subrack
10.2 Connections and functions
10.2.1 External connections
Description Function
PL4, PL6 RS 485 interface
PL3, PL5 Current share with other PPR 16/10
PL12, PL11, PL14, PL13, PL16,
PL15, PL18, PL17, PL20, PL19
Input mains
Bus bar connections DC output
10.2.2 Internal functions
DescriptionFunction
Dip switchesDip switches S12, S11, S14, S13, S16, S15, S18, S17, S20 and S19 are used for
addressing module positions and has to be set for controller supervision to function
properly. The switches can each address six bit binary addresses, which means
up to 64 modules on one COM channel (total 128 modules if both COM channels
are used). Addressing is performed by setting each of the six bits on each switch in
either an ON or OFF position. See
Table 10-1 Addressing module positions .
Figure 10-2 Front and back view of the subrack
PL14 PL11 PL16 PL15 PL18 PL17 PL20 PL13
PL3 PL5
(Curr)
PE
N
L
Negative (DC output)
Input mains
PL12 PL19
PL4PL6
(Com)
Positive (DC output)
Dip switch (S12 for module pos 1)