power King PK4014, Инструкция по эксплуатации

Страница: 8 / 27

7
Chain saw conditions
Warning Danger
Do not modify the chain saw.
Use the pass and accessories provided SURPASS,
or the parts and accessories which are approved by
SURPASS and of the same model as the chain saw. If
the parts are suitable for the machines of SURPASS but
not approved by SURPASS, physical injury or serious
risks may be caused.
Do not use the chain saw which is damaged, poorly adjusted or
not installed completely and safely.
Do not use the chain saw if the muffler is not installed firmly or
damaged.
Check whether the chain saw can stop moving after the throttle
controller is released.
Cutting
The operator must receive training before cutting trees with the
chain saw.
Keep the body away from the chain saw during operation of the
engine.
Be careful to cut small shrubs or trees, as the chain may be
easily stuck by soft branches or soft branches may whip or the
operator may lose the balance.
Be careful to cut large branches under pressure to prevent them
from bouncing and hitting the operator and chain saw after
release.
It is dangerous to cut on the ladder.
The ladder is easy to slip, thus
limiting the control of the chain
saw. Cutting in high places must be
done by professional operators.
Stop the engine before lowering the
chain saw.
Maintenance
All the items of maintenance services related to the chain saw
are listed in the maintenance instructions in the operation
manual. Maintenance must be done by the competent
professional service personnel (the flywheel may be damaged
and even broken if the flywheel and clutch are removed with
inappropriate tools).
Wood cutting operation
To ensure the cutting safety, keep the normal work sequence,
judge the sound and adopt different cutting methods in different
cutting environments.
Do not lend the chain saw to others, unless the operator have
carefully read the operation manual and understood all the
suggestions and guides.
The chain saw must not be operated by children.
The chain saw must not be used for cutting metal rods, metal
plates, plastic and other materials except wood, and can only be
used for cutting trees or wooden products.
Stand on the uphill during cutting of logs and trees without
boughs on slopes, so as to prevent injuries caused by sudden
rolling of wood. Always keep both feet on the ground in the
cutting process.