15
WARNING:
Never attach a wood cutting
or carving blade of any type to this angle
grinder. It is designed for grinding metal
only. Use for any other purpose is not
recommended and creates a hazard which
will result in serious injury.
WARNING:
Never cover the air vents.
They must always be open for proper motor
cooling.
ON/OFF SWITCH
To turn the switch ON, press the front of the
switch slider (1) into the body of the tool. While
pressing on the front of the slider, push it
forward (2) until the front part of the switch
engages the catch (Fig. 6). When the switch
“snaps” into position, the switch will remain ON
and the motor will continue running. To turn the
switch OFF, press the rear of the slider (3) into
the angle grinder body. The switch will “snap” to
the OFF position.
GRINDING
Always
select and use grinding discs that are
recommended for the material to be ground.
Make sure that the maximum operating speed of
the grinding disc selected is
not less than
11,000 RPM.
Secure all work before beginning the grinding
operation.
Secure small workpieces in a vice or clamp to a
workbench.
WARNING:
Never use your grinder with
the guard removed. It has been designed for
use only with the guard installed. Attempting
to use the grinder with the guard removed
will result in loose particles being thrown
against the operator resulting in serious
personal injury.
WARNING:
Never use your grinder
without eye protection. Following this rule
will reduce the risk of serious personal
injury.
ASSEMBLY AND OPERATING
For safety reasons, the operator must
read the sections of this Owner’s Manual
entitled "GENERAL SAFETY
WARNINGS", "POWER TOOL SAFETY",
"SPECIFIC SAFETY RULES",
"EXTENSION CORD SAFETY" and
"SYMBOLS" before using this angle
grinder.
Verify the following every time the angle
grinder is used:
1.
Cord is not damaged
2.
Grinding disc is correct for the type
of material being ground
3.
Grinding disc is in good condition
and securely tightened onto the
spindle
4.
Proper eye, hearing and breathing
protection are being worn.
Failure to adhere to these safety rules
can greatly increase the chances of
serious injury.
WARNING
!
!
!
Fig. 6
!
!
