11
INSTALLING A SANDING DISC
WARNING:
Remove the plug from the
power source before installing or removing
sandpaper.
1.
Firmly press the sanding disc (1) onto the
hook & loop pad (2) (Fig. 1).
NOTES:
a) Place the sanding disc so the holes in the
disc line up with the matching holes in the hook
& loop pad.
b) Press the sanding disc firmly onto the hook &
loop pad.
2.
To remove the sanding disc (1), simply
peel the disc away from the hook & loop
pad (2) (Fig. 2).
SPEED CONTROL SWITCH
To run the sander at its slowest speed, turn the
speed control switch wheel (1) to #1 (Fig. 3). To
run the sander at higher speeds, turn the speed
control switch wheel to a higher number on the
wheel. The sander will be running at full speed
when the wheel is set at “MAX”.
ON/OFF SWITCH
To turn the sander ON, push the right hand side
of the switch (1) until the sander starts. To turn
the sander OFF, press the left hand side of the
switch (2) (Fig. 4).
ASSEMBLY AND OPERATING
!
Fig. 1
1
2
1
2
Fig. 2
Fig. 3
1
Fig. 4
1
2
