Power Glide 60701380, Инструкция по эксплуатации

Страница: 2 / 10

IMPORTANT SAFETY INFORMATION
In this manual, on the labeling, and all other information provided with this product:
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages tht follow this symbol to avoid possible injury or
death.
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could
result in serious personal injury.
CAUTION
CAUTION, used with the safety alert symbol, indicates a hazardous
situation which, if not avoided, could result in minor or moderate injury.
NOTICE
NOTICE is used to address practices not related to personal injury.
1
CALIFORNIA PROPOSITION 65
WARNING: CHEMICAL HAZARD. Use of this tool may cause exposure to chemicals that are
known to the state of California to cause cancer, birth defects or other reproductive harm.
Dust and debris created during cutting, drilling, grinding or sanding on some materials may
contain chemicals known to the State of California to cause cancer or birth defects or other
reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints
• crystalline silica from bricks and cement and other masonry products
• arsenic and chromium from chemically-treated lumber
To reduce exposure to these chemicals, always use approved safety equipment, work in a
well-ventilated area and wear dusk mask that filters out microscopic particles.
PARTS LIST
S/N Description Qty
1 Bolt 2
2 Base 1
3 Extend Wing 2
4 Wing Screw 2
5 Rubber Feet 4
6 Bolt M8x50 1
7 Bolt M5x10 4
8 Spring Washer 8
9 Flat Washer 4
10 Plate 1
11 Rub Slice Pa6 1
12 Pin 45 1
13 Spring 65mn 1
14 Pin Φ 3x20 1
15 Handle Pa6 1
16 Lever Plate Pa6 1
17 Pin A3 1
18 Pointer Pa6 1
19 Bolt M4x12 2
20 Bolt M4x8 9
21 Insert Abs 1
22 Bracket Q235/ Δ 2.5 1
23 Rub Plate 65mn/ Δ 1 1
24 Bolt M6x20 2
25 Table Zl102 1
26 Flat Washer Φ 8 1
27 Lock Nut M8 1
28 Fence Zl102 1
29 Flat Washer Φ 6 8
30 Spring Washer Φ 6 8
31 Bolt M6x30 4
32 Screw M6x15 1
33 Clamp 2102 1
34 Bolt A3 1
35 Flat Washer Φ 4 1
36 Pointer Q235/ Δ 1 1
37 Nut M6 2
38 Spring 2
39 Bend Arm Zl102 1
40 Flat Washer Φ 10 2
41 Lock Nut M10 1
42 Washer Rubber 2
43 Screw(45¡ Lock) 45 1
44 Lock Handle Abs 1
45 Lock Pin Spring 45 1
46 Shoulder Bolt A3 1
47 Bolt M5x14 2
48 Spacer 4
49 Oil Cover Plate Q235 2
50 Bearing Lb254035 3
51 Rod 45 2
S/N Description Qty
52 Rod Mount Zl102 1
53 Cable Clamp 4.2 2
54 Washer Φ 4 2
55 Bolt M6x10 4
56 Limit Plate 1
57 Knob M6x20 1
58 Handle Ball Pa6 1
59 Lock Pin Spring 65mn 1
60 Lock Pin A3 1
61 Spring Column Pin Φ 2.5x16 1
62 Stand Zl102 1
63 Screw A3 1
64 Screw A3 1
65 Wave Washer Φ 6 2
66 Depth Stop Lever Q235/ Δ 2 1
67 Link Arm Bolt A3 2
68 Link Arm Q235/ Δ 2.5 1
69 Brush Hold Cover Bakelite 2
70 Carbon Brush 4
71 Brush Holder 2
72 Motor Housing Pa6-gf30 1
73 Bolt M6x30 4
74 Spring 2
75 Stator 1
76 Bolt St5x65 2
77 Block Circle Pp 1
78 Bearing 6000 1
79 Rotor 1
80 Bearing 6202 1
81 Lock Button Q235/ Δ 2 1
82
Lock Button Spring .6x7.2x33.2
1
83 Spring Washer Φ 4 2
84 Block Plate Q235/ Δ 1 1
85 Spring 65mn 1
86 Rail Pin A3 1
87 Cover Shell Zl102 1
88 Bolt M6x10 1
89 Bolt M6x20 2
90 Dust Pipe Pa6-gf30 1
91 Dust Bag 1
92 Screw M6x45 1
93 Lock Washer Rubber 2
94 Bearing Hk1210 1
95 Spring Washer Φ 17 1
96 Gear 40cr 1
97 Front Cover Zl102 1
98 Bearing 6203 1
99 Output Shaft 45 1
100 Half Round Key 4x13 1
101 Bearing Cover Q235/ Δ 2 1
102 bolt M5X18 3
Note: Some parts are listed and shown for illustration purposes only, and are not available
individually as replacement parts.
S/N Description Qty
103 inner flange 45 1
104
blade 10"x5/8"x0.110" (30T)
1
105 outer flange 45 1
106 screw (LHT) M8X20 1
107 lock nut M5 1
108 small cover Q235/ δ 2 1
109 large cover Q235/ δ 1.5 1
110 wave washer φ 8 1
111 bolt A3 1
112 bolt M8X12 1
113 spring 1
114 blade cover PC 1
115 link arm plate ZL102 1
116 switch FA1-10/2 1
DA1-10/2W
117 bolt ST4.2×14 2
ST4.2×18 4
118 grip PA6-GF30 1
119 bolt ST6×25 2
120 bolt M5X50 2
121 handle, upper PA6-GF30 1
122 bolt ST4.2×10 2
123 press plate 1
124 power cord 1
125 rubber boot 1
126 handle, lower PA6-GF30 1
148 positioning pin A3 1
149 stand 1 Q235 1
151 spanner 1
152 seal ring 5X1.8 1
Laser Assembly Parts
20 bolt M4X8 6
35 flat washer φ 4 6
122 bolt ST4.2×10 1
134 battery cover 1
135 contact 1
136 spring 2
137 switch KCD-117-S 1
138 battery cover 1
139 switch cover bottom 1
140 laser base 1
141 laser bracket Q235/ δ 2 1
142 nut M4 1
143 bolt M4X16 1
144 laser head 1
145 battery AAA 2
146 contact 1
147 cable 1
18