9039595
Air Engraving Pen
V1.0
2
For technical questions call 1-800-665-8685
SPECIFICATIONS
Air Inlet
1/4 in.
Pressure Range
90 PSI
Air Consumption @ 90 PSI
3 CFM
Average CFM @ 15 Second Run Time
1 CFM
CFM @ Full Load
3 CFM
Speed Rating
13,000 BPM
Min. Hose Size
3/8 in.
Overall Length
5-1/2 in.
Material
Stainless-steel housing
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A notice is
an alert that there is a possibility of property damage, injury or death if certain
instructions are not followed.
DANGER!
This notice indicates an immediate and specific hazard that will result in
severe personal injury or death if the proper precautions are not taken.
WARNING!
This notice indicates a specific hazard or unsafe practice that could
result in severe personal injury or death if the proper precautions are
not taken.
CAUTION!
This notice indicates a potentially hazardous situation that may result in
minor or moderate injury if proper practices are not taken.
NOTICE!
This notice indicates that a specific hazard or unsafe practice will result
in equipment or property damage, but not personal injury.
INTRODUCTION
The air engraving pen is ideal for engraving wood, metal, ceramics and more.
Strong, durable stainless-steel housing resists corrosion.
SAFETY
WARNING! Read and understand all instructions before using this tool. The
operator must follow basic precautions to reduce the risk of personal injury
and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and
maintenance instructions.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well-lit and free
of distractions. Place lights so you are not working in a shadow.
2.
Do not install or use in the presence of flammable gases, dust or liquids.
