V4.0
10 in. 3-Speed Corded Exhaust Shutter Fan
8979965
Visit www.princessauto.com for more information
5
•
These utility exhaust fans are for general-purpose exhaust applications
only. Do not use these exhaust fans in an area where corrosive or explosive
materials may be found.
•
Follow all local and provincial electrical and safety codes in Canada, as well
as the Occupational Safety and Health Administration (OSHA) and the
Canadian Electric Code (CEC) standards.
•
Always disconnect power source before working on or near a motor or its
connected load.
•
Protect the power cable from coming in contact with sharp objects.
•
Do not kink or create tight bends in the power cable and never allow the in
contact with oil, grease, hot surfaces, or chemicals.
•
Make certain that the power source conforms to the requirements of your
specific exhaust fan model. The fan frame and motor must be electrically
grounded to a suitable electrical ground, such as a grounded water pipe or
ground wire system.
•
To reduce the risk of injury to persons, please observe the following: CSA
compliant guards are required when fan is installed below 2.5 meters (8.2
feet) above the floor or grade level.
ASSEMBLY & OPERATION
Tools/Materials Needed:
•
Mounting Fasteners (8)
•
Sealant or Caulk
•
Regular Screwdriver Set
1. The unit should be securely mounted in a rigid framework.
NOTICE! Allowing the fan frame to flex or move will result in excess
vibrations, which may cause possible premature shutter failure.
2. Plug fan directly into 120V AC, 60 Hz wall outlet. Ensure plug fits tightly in
outlet. A loose connection may cause overheating and damage to the plug
or fan.
NOTICE! To prevent overloading a circuit, do not plug the fan into a circuit
that is servicing other electrical needs.
