4.
DO NOT attempt to repair damaged or defective high-pressure
hoses. Always replace them.
5.
DO NOT repair leaking connections with sealant of any kind.
Replace the o-ring or seal.
6.
DO NOT disconnect the high-pressure hose from the pump and
spray gun while the system is pressurized.
7.
Always ensure that the spray gun, nozzles, hoses and fittings are
correctly attached before starting the motor.
8.
NEVER hold onto the hose or fittings during operation. This can
allow pressurized water to escape and inflict an injury.
9.
DO NOT plug this pressure water into a hot water supply. This
pressure washer is designed for cold water use only.
10. Prior to starting the pressure washer in cold weather, be sure ice
has not formed in any part of the equipment.
11. Ensure the pressure washer is not covered during operation to
avoid overheating the motor.
12. This pressure washer is capable of producing high pressure (see
Specifications). To avoid property damage and personal injury, do
not operate the pump with components rated for less than the
working pressure.
13. Do not connect the pressure washer to a water source that
exceeds 150 PSI.
14. If connecting the pressure washer to a portable water system,
ensure the water system is protected against backflow.
15. NEVER attach or remove wand or hose fittings while system is
pressurized.
16. Never transport or make adjustments to this unit while it is running.
17. Do not allow the high pressure hose to come in contact with any
hot part of the unit. The hose might be damaged, possibly causing
it to burst or leak under high pressure.
18. Shut off the pressure washer if it is leaking water. Discharge all
pressure before tightening fittings or having repair work done by a
qualified technician.
8976821
ELECTRIC PRESSURE WASHER
V
4
.0
Assistance available at www.princessauto.com or 1-800-665-8685
Page 6
