Power Fist 8968828, Руководство пользователя

Страница: 11 / 32

V4.0 12 in. Electric Concrete Saw 8968828
Visit www.princessauto.com for more information 11
1. Push in the safety lock button (Fig.5a) on
the side of the handle with your thumb.
2. Depress the main trigger switch (Fig.5b) to
start the motor.
WARNING! Never start the saw with the cutting
edge of the saw blade in contact with the
workpiece surface.
PRE-CUTTING
• Ensure that the power supply matches the
requirements specified on the matches the
requirements specified on the machines rating plate.
• Ensure that the machine trigger switch is in the OFF position. If the machine
is connected to a power source with trigger switch the ON position, the
machine could start operating immediately with the possibility of a serious
accident occurring.
•
If an extension cable is required, it must be a suitable type for use outdoors
and so labeled.
•
The manufacturer’s instructions should be followed when using an
extension cable.
• Route any extension cable so that it does not pose a tripping (or any other)
hazard to the operator or any bystanders.
WHEEL GUARD ADJUSTMENT
The wheel guard is adjustable and should be
positioned to provide the operator with personal
protection and maximum visibility of the cutting
area.
1. Loosen the wheel guard locking knob and
rotate the guard to the required position.
(Fig. 6)
2. Securely tighten the wheel guard locking
knob to lock the guard in place.
NOTICE! Check regularly the tightness of this
locking knob and the security of the wheel guard during operation.