8863409
LED 500 Lumen Work Light with Cord Reel
V4.0
10
For technical questions call 1-800-665-8685
a. Do not replace the cord with one that is different than what is supplied
with this reel. Changes in diameter, weight per foot, length of cord or
flexibility will affect the operation of the reel.
4. Keep the tool handles clean, dry and free from oil/grease at all times.
5. Keep the cord clean, dry and free from oil/grease at all times.
a. Use a cloth dipped in warm water to remove dirt or deposits and
ensure correct winding on the reel. Do not use detergents or solvents
which could prove incompatible with cable-winder materials.
6. Maintain the tool’s labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
7. Ensure that all electrical power is disconnected from the reel before servicing.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
Problem(s)
Possible Cause(s)
Suggested Solution(s)
Cable will not
fully retract.
Loss of tension to reel
spring.
Have a qualified technician
inspect internal mechanism and
replace parts as needed.
Cable will not
retract at all.
Reel mechanism is jammed
or misaligned.
1. Pull cord out until click is
heard. Attempt to allow cord
to retract into housing.
2. Have a qualified technician
inspect internal mechanism
and replace parts as needed.
No electrical
power at output
end of cable.
1. Circuit breaker tripped.
2. Connections may not be
properly wired.
1. Reset circuit breaker.
2. Check all connections to
ensure that they are properly
wired.
