V4.0
Adjustable Shop Stool with Backrest
8821811
Visit www.princessauto.com for more information
5
6. Fit the small ring (#7) over the top legs and align the bolt holes in the leg
and rings. Insert an M6 bolt through all the bolt holes. Secure each with an
M6 locking nut.
7. Tighten all bolts to secure the legs.
8. Insert the hydraulic cylinder (#4) into connector until it is seated. The
plastic part of the cylinder will face upward.
9. Fit the seat (#2) over the cylinder and push down to ensure the cylinder
and connector plate are secure.
10. Loosen the screws in brackets for the backrest support (#3). The brackets
are under the seat.
11. Insert each backrest support into the brackets, but do not tighten the
screws.
12. Press and hold the buttons on the backrest (#1) and it onto the two
backrest supports. Release the buttons once the backrest has slid on all
the way.
13. Tighten the screws on the backrest brackets.
14. Recheck the tightness of all bolts.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Maintain the tool’s labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
