8677114
563 Lumen Cree LED Spotlight
V4.0
6
For technical questions call 1-800-665-8685
CHARGING
WARNING! A damaged battery can leak acid. Avoid contact with eyes and skin.
If contact occurs, flush immediately with large amounts of water. DO NOT
ingest. If contact with eyes or ingestion occurs, consult physician immediately.
Fully charge the battery after each use to extend the battery’s life. The spotlight
comes with a 120V AC battery charger (square) and a 12V battery charger
(plugs into 12V outlet).
1. Lock the trigger switch in the OFF position. Charging while the spotlight is
on may damage the charger and spotlight.
2. Plug either the AC or DC charger into bottom of
the spotlight’s handle (Fig. 2-1).
3. The LED will light up during charging. It will
automatically shut off once the battery is fully
charged (Fig. 2-2).
a. Run the vehicle’s engine when charging
the spotlight with the DC charger to avoid
discharging the vehicle’s battery.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Only use accessories intended for use with this tool.
4. Maintain the tool’s labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
Fig. 2