8663783
12 in. Vise Mount Box/Pan Metal Brake
V4.0
4
For technical questions call 1-800-665-8685
2. Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3. Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1. Use the correct tool for the job. This tool was designed for a
specific function. Do not modify or alter this tool or use it for
an unintended purpose.
2. The workpiece edges may be sharp or have metal slivers protruding from it
after bending. Wear heavy duty gloves when handling the workpiece
.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the parts list are included.
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included Parts List.
Dashed numbers in parenthesis (Fig. 1-1) refer to a specific point in an
illustration or image.
1. Insert the hand brake into the vise. The
main body (#1) flange fits between the
vise jaws. Close the vise jaws to lock
the hand brake in place.
2. Insert the handle (Fig. 1-2) into the
eccentric shaft (Fig. 1-1) opening.
Tighten the handle.
Fig. 1
