V 4.0 8650319
6
For technical questions call 1-800-665-8685
Fast Heat Pistol Grip Soldering Gun
MAINTENANCE
The gun and the Soldering Tip (#1) are designed to easily disconnect for occasional
replacement.
TIP REPLACEMENT
Unscrew the two screws connecting the Soldering Tip (#1) to the gun. Pull off the old tip,
replace it, and replace the two screws.
LAMP REPLACEMENT
Attention:
1. Before using, verify the electricity requirements and visually inspect the gun and your
workstand.
2. Never use the gun in the rain.
3. Make sure no foreign objects are in the gun’s internal parts.
4. Never dismantle the gun. Contact an authorized service technician.
5. Disconnect the gun from the power source when not in use.
6. This gun is primarily designed for indoor use.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS
MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/
OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE
BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT
OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
