8597312
Laminate Floor Cutter
V4.0
4
For technical questions call 1-800-665-8685
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1. Use the correct tool for the job. This tool was designed for a specific function.
Do not modify or alter this tool or use it for an unintended purpose.
2. Do not use the tool if any parts are damage broken or misplaced. Repair or
replace the parts.
3. Keep cutting blade in the fully closed position when not in use.
4. Keep hands away from the blade cutting area to avoid an injury.
5. Periodically check that all hardware remains tight.
6. Inspect material for foreign objects such as staples, nails or debris.
Remove from material before cutting.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the parts list are included.
Contents:
•
Laminate Floor Cutter
•
V-Support
OPERATION
The Laminate Floor Cutter has a flat cutting blade surface instead of a sharp
edge like a knife. The 90º edge on either side of the cutter will slice through the
laminate and remove a section equal to the cutting blade’s width.
The cut edge will be slightly rough. Place this edge against the wall where a
baseboard or finished molding will cover it.
Numbered references in parenthesis (#1) refer to the included Parts List.
