Visit www.princessauto.com for more information
5
8548612
V 4.0
3/8” (10mm) VSR Electric Drill
PERSONAL SAFETY
1. Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use tool while tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating power tools may result in serious
personal injury.
2. Use safety equipment. Always wear eye protection. Safety equipment such as
dust mask, non-skid safety shoes, hard hat, or hearing protection for appropriate
conditions will reduce personal injuries.
3. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in
moving parts. Air vents may cover moving parts and should be avoided.
4. Avoid accidental starting. Ensure the switch is in the off position before plugging in.
Carrying power tool with your finger on the switch or plugging in power tools that
have the switch on invites accidents.
5. Remove any adjusting keys or wrenches before turning the power tool on. A wrench
or key that is left attached to a rotating part of the tool may result in personal injury.
6. Do not overreach. Maintain proper footing and balance at all times. Loss of balance
can cause an injury in an unexpected situation.
7. If devices are provided for connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of these devices can reduce dust
related hazards.
8. Do not use a ladder or unstable support. Stable footing on a solid surface enables
better control of the tool in unexpected situations.
9. Keep tool handles dry, clean and free from oil and grease. Slippery handles cannot
safely control the tool.
TOOL USE AND CARE
1. Secure the work piece. Use clamp or other practical way to hold the workpiece to a
stable platform. Holding the workpiece by hand or against your body is unstable and
may lead to loss of control.
2. Do not force the power tool. The tool will perform the job better and safer at the feed
rate for which it is designed. Forcing the tool could possibly damage the tool and may
result in personal injury.
3. Use the correct power tool for the job. Don’t force the tool or attachment to do a job
for which it is not designed.
4. Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with
the switch is dangerous and must be repaired or replaced by an authorized service center.
5. Turn power tool off, and disconnect the plug from the power source and/or battery
pack from the power tool before making any adjustments, changing the accessories,
or storing the tools. Such preventive safety measures reduce the risk of an accidental
start up which may cause personal injury.
6. Store idle tool out of reach of children and other inexperienced persons. It is
dangerous in the hand of untrained users.
7. Maintain power tools with care. Check for proper alignment and binding of moving
parts, component breaks, and any other conditions that may affect the tool’s
operation. A guard or any other part that is damaged must be properly repaired or
replaced by an authorized service center to avoid risk of personal injury.